Moeller - worlds leading machinists of gamma titanium aluminide turbine blades and other parts
Moeller has cnc machining and creep feed grinding expetise to produce TiAl parts for aerospace and automotive applications.
P R O D U C T S
job shop jobshop cnc machining titanium aluminide turbine blades
Machined
Parts

Self-Locking
Fluid Fittings

Self-Locking
Fasteners

Self-Locking
Plugs

Bearing
Lock Nuts

Blade/Vane
Production

Creep Feed
Grinding

Ti-Al
Machining
   you are here

Company
Areas

Home   Contacts

Overview   Jobs

Uploaded Files
0

TITANIUM    ALUMINIDE    MACHINING
Titanium Aluminide Turbine Blade Titanium Aluminide, also known as intermetallic Gamma Titanium Aluminide or γ - TiAl, is an amazing material. It offers strength and high temperature capabilities similar to nickel based alloys, but only about half the weight. It is also amazingly difficult to machine. This material is in a class all by itself. It is brittle, has low thermal conductivity and it is highly abrasive. If the machining is not done to exacting parameters metallurgical surface defects can arise. Additionally, improper machining techniques can lead to chipping and cracking in thin sections and sharp edges and grain pullout.

Fortunately, we have learned to overcome these obstacles.

We at Moeller have been machining Gamma Titanium Aluminide in high volume production since 2007, with several years of development work prior to that. We have more experience machining TiAl than any other source, anywhere in the world. This is based on both piece count and machine hours. We are the prime machining source for the Gamma Titanium Aluminide turbine blades that are helping to make new-generation aircraft engines lighter and more fuel-efficient and cleaner. We have devoted literally thousands of engineering and machine hours to perfecting a variety of techniques for machining Gamma Titanium Aluminide including milling, turning, grinding, drilling, EDM, and polishing.
Titanuim Aluminide Impellor Quality and Productivity

Our expertise with TiAl is such that we are achieving defect-free yeilds and machining costs comparable with equivalent parts made from 6-4 titanium or stainless steel. This is the result of implementing unique fixturing concepts of our own design along with proven combinations of machining paramaters and tooling.

If you have Titanium Aluminide machining requirements, we have the expertise, the equipment, and the capacity available. Please call us at 1-800-321-8010 or e-mail:

No Spam Email Address